Inventro polymers make peek parts for peek rod, sheet and injection molded components to near shape. products made from peek stock: peek connector, peek nozzle, peek medical components, peek gear, peek ball valve seat, peek washers, peek insulator, pek antenna.
Peek Rods grades offer chemical and hydrolysis resistance similar to PPS, can operate at higher temperatures. PEEK 1000 offers steam and wear resistance, while carbon-reinforced PEEK provides excellent wear capabilities. Our latest grade, PEEK HPV, offers outstanding bearing performance. PEEK can be used continuously to 480°F (250°C) and in hot water or steam without permanent loss in physical properties. For hostile environments, PEEK is a high strength alternative to fluoropolymers. PEEK carries a V-O flammability rating and exhibits very low smoke and toxic gas emission when exposed to flame.
This general purpose grade is unreinforced and offers the highest elongation and toughness of PEEK grades. The newly available black PEEK is ideal for instrument components where aesthetics are important, as well as for seal components where ductility and inertness are important.
PEEK GF30 (30% Glass- Reinforced):
The addition of glass fibers significantly reduces the expansion rate and increases the flexural modulus of PEEK. This grade is ideal for structural applications that require improved strength, stiffness or stability, especially at temperatures above 300°F (150°C).
PEEK – CA30 :
This 30% carbon fiber reinforced grade combines even higher stiffness, mechanical strength & creep resistance than PEEK-GF30, Carbon fiber provide 3.5 times higher thermal conductivity than virgin PEEK. (black)
Peek Injection Molded peek can be injection mold to form nett or near nett shapefor different applications. inventro polymers is capable to handle this type of projects. Some of the examples for peek injection molded parts. products can me injection molded: peek rings, peek injection molded, peek gears, peek rings, peek backup ring, peek electronics components.